Stop Slotting the Stupid Way! Use High Speed Machining!

Watch along as we create the SprutCAM toolpaths and then use the Tormach PCNC to machine!

I used to cut slots the stupid way. Until very recently. I decided enough was enough – I need to start being a “smarter” machinist! So instead of using one tool and an 8 minute cycle time, let’s use high speed machining toolpaths, a LakeShore Carbide roughing end mill and a high-helix finishing end mill to make a BETTER part with LONGER tool life and a ~3 minute cycle time!

Related Videos & Resources:

Fusion 360 2D Adaptive Toolpath Containment! FF106
Chamfering in Fusion 360 CAM
Eliminate Rest Machining Whisper Cuts in Fusion 360!