Hands-On CNC Training
Upcoming Events
- Intro to TIG May 10 & 11, 2018
May 10, 2018 - May 11, 2018
9:00 am - 5:00 pm
Intro to TIG Welding Day One Welding and shop safety What is TIG welding? Machines and settings TIG torch set up Regular collet body Gas lens Cups sizes Gas flow Tungsten types, sizes and prep Feeding filler material Gas types and uses 100% argon Mixed gases Mixing your own gas Practice TIG welding using a (more…)
- Introduction to Fusion 360 May 12-13, 2018
May 12, 2018 - May 13, 2018
9:00 am - 5:00 pm - Introduction to Fusion 360 June 23-24, 2018
June 23, 2018 - June 24, 2018
9:00 am - 5:00 pm - Introduction to Fusion 360 July 21-22, 2018
July 21, 2018 - July 22, 2018
9:00 am - 5:00 pm - Introduction to Fusion 360 Aug 18-19, 2018
August 18, 2018 - August 19, 2018
9:00 am - 5:00 pm
2 day class, $300
- Hands On CNC Machining Class May 14-16, 2018
May 14, 2018 - May 16, 2018
9:00 am - 5:00 pm - Hands On CNC Machining Class June 25-27, 2018
June 25, 2018 - June 27, 2018
9:00 am - 5:00 pm - Hands On CNC Machining Class July 23-25, 2018
July 23, 2018 - July 25, 2018
9:00 am - 5:00 pm - Hands On CNC Machining Class Aug 20-22, 2018
August 20, 2018 - August 22, 2018
9:00 am
3 Day class, $1,175
- Fusion 360 - Advanced CAM May 17-18, 2018
May 17, 2018 - May 18, 2018
9:00 am - 5:00 pm
2 Day class, $400
- Fixturing & Advanced CAM - June 28-29, 2018
June 28, 2018 - June 29, 2018
9:00 am - 5:00 pm - Fixturing & Advanced CAM - July 26-27, 2018
July 26, 2018 - July 27, 2018
9:00 am - 5:00 pm - Fixturing & Advanced CAM - Aug 23-24, 2018
August 23, 2018 - August 24, 2018
9:00 am - 5:00 pm
This two-day, hands-on class is focused on workholding, fixturing & Advanced CAM. Curriculum: Workholding & Fixturing: Overview of workholding strategies Review and discussion of 50+ fixture examples Hands-on review of soft jaws, fixture plates, Mitee-Bite, Carr-Lane and other workholding and fixturing tools Discussion of workholding strategy, including balance of time, cost, fixture life, process reliability (more…)